Get high-quality PVD coated face milling inserts from our factory. Designed for precision and durability, our inserts ensure efficient and accurate machining.
Cost-efficiency with Process Reliability Tungsten carbide milling Inserts HNMG. face milling insert.it’s double-sided 12-edge economical face milling cutter with its own wiper blade and cutting edge has a certain strength with PVD Coating, which offers excellent wear and oxidation resistance, good chipping resistance.Dimensionally accurate, durable and reliable performance.
Length
Size(mm)
IC
S
r
9
15.875
5.56
1.2
1. Flank Wear? Higher cutting resistance,Notch wear on flank, Poor roughness of surface, or deterioration of accuracy. Soft grades,Excessive cutting speed,Small flank angle,Low feed. Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed. 2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel. Soft grades,Excessive cutting speed, Excessive feed,The strength of chip breaker Insufficient. Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed, Select a higher strength chip breaker. 3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life. Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool. Select a tougher grade, Decrease feed rate, Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle. 4. Insert Fracture? Cutting resistance increased Poor surface roughness. Toughness insufficient, Excessive feed rate, Strength of cutting edge insufficient,Instability of the tool. Select a tougher grade, Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle. 5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness. Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge. Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant). 6. Build-Up-Edge? Workpiece dissolve with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials. Cutting speed too low, Cutting edge obtuse,Unsuitable tool material. Increase cutting speed, Increase rake angle,Select small sticking force.
Type
Ap
(mm)
Fn
(mm/rev)
Grade
CVD
PVD
VK3020
VK3040
VK1025
VK1325
VK1525
VK1328
VR1010
VR1520
VR1525
VR1028
VR1330
HNMG0907ANSN-R
1.50-4.00
0.20-
0.70
•
•
O
O
HNMG0907ANSN-M
1.00-3.00
0.05-
0.15
•
•
O
O
• : Recommended Grade O: Optional GradeThis kind of insert can obtain a good surface finishing, high economy, suitable for machining material steel, stainless steel, cast iron and super alloys.
This kind of insert can obtain a good surface finishing, high economy, suitable for machining material steel, stainless steel, cast iron and super alloys.
